Ecotoxicity Evaluation of Industrial Waste and Construction Materials: Comparison Between Leachates from Granular Steel Slags and Steel Slags-Containing Concrete Through a Plant-Based Approach.

Steel slags, the main waste product from the steel industry, may have several reuse possibilities. Among others, building applications represent a crucial field. However, the potential impact of harmful substances on the environment should be assessed. The aim of this study was to assess the phytotoxicity of steel slags (SS) and concrete mixtures cast with a partial replacement of SS (CSS). Leaching tests were carried out on four SS and four CSS according to EN 12457-2 and UNI EN 15863, respectively. Each leachate was assayed using root elongation tests on 30 seeds of Allium cepa, Cucumis sativus, and Lepidium sativum, respectively, and on 12 bulbs of A. cepa. The latter also allowed the analysis of other macroscopic parameters of toxicity (turgidity, consistency, colour change and root tip shape) and the evaluation of the mitotic index on 20,000 root tip cells per sample. None of the samples induced phytotoxic effects on the organisms tested: all samples supported seedlings emergence, verified by root elongation comparable to, or even greater than, that of the negative controls, and did not affect cell division, as evidenced by mitotic index values. The absence of phytotoxicity demonstrated by the leachates allows SS and SS-derived concrete to be considered as reliable materials suitable for use in civil constructions or in other engineering applications, with economic and environmental advantages, such as the reduction of the final disposal in landfills as well as the consumption of natural resources.

Do new cement-based mortars pose a significant threat to the aquatic environment?

Nowadays, the use of multi-functional mortars has increased significantly, with interesting applications in the sustainable construction. In the environment, the cement-based materials are subjected to leaching, so the assessment of potential adverse effects upon aquatic ecosystem is necessary. This study focuses on the evaluation of the ecotoxicological threat and of a new type of cement-based mortar (CPM-D) and its raw materials leachates. A screening risk assessment were performed by Hazard Quotient methods. The ecotoxicological effects were investigated by a test battery with bacteria, crustacean, and algae. Two different procedures, Toxicity test Battery Index (TBI) and Toxicity Classification System (TCS), to obtain a single value for toxicity rank were used. Raw materials showed the highest metal mobility and in particular, for Cu, Cd and V potential hazard was evidenced. Leachate toxicity assessment evidenced the highest effects linked to cement and glass while the mortar showed the lowest ecotoxicological risk. TBI procedure allows a finer classification of effect linked to materials with respect to TCS which is based on worst case approach. A safe by design approach taking into account the potential and the effective hazard of the raw materials and of their combinations could allow to achieve sustainable formulations for building materials.

Chemicals of concern in building materials: A high-throughput screening.

Chemicals used in building materials can be a major passive emission source indoors, associated with the deterioration of indoor environmental quality. This study aims to screen the various chemicals used in building materials for potential near-field human exposures and related health risks, identifying chemicals and products of concern to inform risk reduction efforts. We propose a mass balance-based and high-throughput suited model for predicting chemical emissions from building materials considering indoor sorption. Using this model, we performed a screening-level human exposure assessment for chemicals in building materials, starting from product chemical composition data reported in the Pharos Building Products Database for the USA. Health risks and MAximum chemical Contents from High-Throughput Screening (MACHTS) were determined, combining exposure estimates with toxicity information. Exposures were estimated for > 300 unique chemical-product combinations from the Pharos databases, of which 73% (25%) had non-cancer (cancer) toxicity data available. We identified 55 substances as chemicals of high concern, with actual chemical contents exceeding MACHTS by up to a factor 105, in particular diisocyanates and formaldehyde. This stresses the need for more refined investigations to select safer alternatives. This study serves as a suitable starting point for prioritizing chemicals/products and thus developing safer and more sustainable building materials.

Public health risks from asbestos cement roofing.

There is no identified risk-free threshold exposure to asbestos. Based on epidemiology and toxicology, asbestos fiber dimensions have been implicated in causing asbestos-related diseases. Phase-contrast microscopy provides only a limited index of exposure to fiber dimensions implicated in mesothelioma induction. Installed asbestos-containing materials (ACMs) create an ongoing risk of intense exposure during natural disasters and remodeling, along with low-level exposure arising from the continual emission of airborne asbestos into the environment arising from weathering of installed ACM. Epidemiological studies have demonstrated a risk of disease associated with proximity to asbestos cement roofing (ACR), while ongoing environmental emissions of asbestos from installed ACR have also been demonstrated. Owing to the limitations of the available data, a precautionary approach is warranted; asbestos-free roofing materials should be used in new construction and existing ACR should be removed at the earliest opportunity.

Micronucleus Formation in Primary Oropharyngeal Epithelial Cells Reveals Mutagenicity of Cement Dusts.

BACKGROUND/AIM: Epidemiological studies showed an increased risk of developing laryngeal head and neck squamous cell carcinoma (HNSCC) for employees working in the construction business. This suggested a causal link between exposure to cement particles and development of HNSCC but data were missing. MATERIALS AND METHODS: We established an Organisation for Economic Co-operation and Development (OECD) guideline 487-conform micronucleus assay (MNA) using oropharyngeal mucosa-derived primary epithelial cells (OPCs) ex vivo. OPCs from healthy mucosa of 52 donors were cultured in vitro and incubated with serial concentrations of two common cement particles. Mitomycin C was used as a soluble positive control, and TiO2 and DQ12 were used as negative and positive particle controls. Bi-nucleated cells were counted and the mitotic index (MI) was determined. Subsequently, micronuclei-containing bi-nucleated cells (MN+) were counted. RESULTS: Cement particles, in concentrations not significantly reducing ex vivo proliferation according to mitotic index, dose-dependently increased micronuclei formation. CONCLUSION: Through the establishment of an OECD guideline 487 conform MNA, we demonstrate the mutagenic effects of cement on human OPCs.

Italian pool of asbestos workers cohorts: asbestos related mortality by industrial sector and cumulative exposure.

OBJECTIVE: Italy has been a large user of asbestos and asbestos containing materials until the 1992 ban. We present a pooled cohort study on long-term mortality in exposed workers. METHODS: Pool of 43 Italian asbestos cohorts (asbestos cement, rolling stock, shipbuilding, glasswork, harbors, insulation and other industries). SMRs were computed by industrial sector for the 1970-2010 period, for the major causes, using reference rates by age, sex, region and calendar period. RESULTS: The study included 51 801 subjects (5741 women): 55.9% alive, 42.6% died (cause known for 95%) and 1.5% lost to follow-up. Asbestos exposure was estimated at the plant and period levels. Asbestos related mortality was significantly increased. All industrial sectors showed increased mortality from pleural malignancies, and most also from peritoneal and lung cancer and asbestosis, with exposure related trend. Increased mortality was also observed for ovarian cancer and for bladder cancer. DISCUSSION: The study confirmed the increased risk for cancer of the lung, ovary, pleura and peritoneum but not of the larynx and the digestive tract. A large increase in mortality from asbestosis was observed.

Chronic cement dust load induce novel damages in foliage and buds of Malus domestica.

Cement industry-derived pollutants appear to play multiple roles in stimulating abiotic stress responses in plants. Cement dust deposition on agriculture fields can affect soils, photosynthesis, transpiration and respiration of plants. Here, we characterised the acute physiological responses of Malus × domestica leaves to different cement dust concentrations. The cement dust was sprinkled over plants daily for 2 months at 10 and 20 g/plant, with 0 g/plant serving as the control. Leaf physiological responses revealed significant increases in oxidative stress and antioxidant enzyme activity levels. Additionally, ascorbic acid, soluble sugar, free amino acid, and pigment levels decreased after exposure to cement dust. Macroscopic morphometric parameters, such as weight, dry matter content, and lengths and widths of leaves and buds, were significantly reduced in the cement-treated groups. A histological analysis of leaves and buds revealed decreased cellular areas, cellular damage, and abridged leaf thickness, while an ion leakage assay confirmed the negative effects on tissue integrity. These results provide evidence that cement dust is a hazardous pollutant that induces abiotic stress responses and has degradative effects on leaf health, pigment and biochemical metabolite levels, and anatomical features. Studies to determine the elemental residues of cement dust present in edible plant parts and the adverse impacts of their consumption on human health are strongly recommended.

Malignant asbestos-related disease in a population exposed to asbestos.

OBJECTIVES: The first asbestos fiber cement plant in Spain operated in Cerdanyola, in the Barcelona metropolitan area, between 1907 and 1997. We describe clinical and epidemiological characteristics of patients diagnosed with the malignant asbestos-related disease (ARD) in the area of the plant between 2007 and 2016. METHODS: A prospective, descriptive study was undertaken in the 12 municipalities of the county of Barcelona most proximate to the plant. We describe malignant ARD cases by time of diagnosis, source of exposure, periods of exposure and latency, and distribution by sex. Cumulative incidence and age-standardized incidence rates (ASIR) are calculated. RESULTS: Of 477 patients diagnosed with ARD between 2007 and 2016, 128 (26%) presented with asbestos-associated malignancy. Pleural mesothelioma was noted in 105 patients (82.0%) with a linear trend Z-score of -0.2 (NS) in men and 2.7 (P < .01) in women. The highest ASIRs for malignant ARD (6.1/100 000 residents/year; 95% confidence interval [CI], 2.2-13.3) and pleural mesothelioma (4.8/100 000 residents/year; 95% CI, 1.5-11.6) occurred in municipalities closest to the focal point of contamination. The origin of malignant ARD was nonoccupational in 32.2% of men and 81.6% of women (P < .001). CONCLUSIONS: More than 20 years after the closure of the fiber cement plant, the grave consequences of exposure to asbestos remain. The detection of cases of pleural mesothelioma in men seems to have plateaued whereas in women an ascending trend continues, which principally has its origin in nonoccupational exposures.

In vitro toxicity assessment of respirable solid surface composite sawing particles.

Solid surface composites (SSCs) are a class of popular construction materials composed of aluminum trihydrate and acrylic polymers. Previous investigations have demonstrated that sawing SSC releases substantial airborne dusts, with a number-based geometric mean diameter of 1.05 µm. We reported that in mice, aspiration exposure to airborne SSC dusts induced symptoms of pulmonary inflammation at 24-h postexposure: neutrophilic influx, alveolitis, and increased lactate dehydrogenase (LDH) and pro-inflammatory cytokine levels in lavage fluid. The particles appeared to be poorly cleared, with 81% remaining at 14-day postexposure. The objective of this study was to determine the toxicity specifically of respirable particles on a model of human alveolar macrophages (THP-1). The relative toxicities of subfractions (0.07, 0.66, 1.58, 5.0, and 13.42 µm diameter) of the airborne particles were also determined. THP-1 macrophages were exposed for 24 h to respirable particles from sawing SSC (0, 12.5, 25, 50, or 100 µg/ml) or size-specific fractions (100 µg/ml). Exposure to respirable SSC particles induced THP-1 macrophage toxicity in a dose-dependent manner. Viability was decreased by 15% and 19% after exposure to 50 and 100 µg/ml SSC, respectively, which correlated with increased cell culture supernatant LDH activity by 40% and 70% when compared to control. Reactive oxygen species (ROS) production and inflammatory cytokines were increased in a dose-dependent manner. A size-dependent cytotoxic effect was observed in the cells exposed to subfractions of SSC particles. SSC particles of 0.07, 0.66, and 1.58 µm diameter killed 36%, 17%, and 22% of cells, respectively. These results indicate a potential for cytotoxicity of respirable SSC particles and a relationship between particle size and toxicity, with the smallest fractions appearing to exhibit the greatest toxicity.

World Trade Center Dust induces airway inflammation while promoting aortic endothelial dysfunction.

Respiratory ailments have plagued occupational and public health communities exposed to World Trade Center (WTC) dust since the September 11, 2001 attack on the Twin Towers in Lower Manhattan. We proposed that these ailments were proposed to be induced by inhalation exposure to WTC particulate matter (WTCPM), that was released during the collapse of the buildings and its subsequent resuspension during cleanup. We investigated this hypothesis using both an in vitro and an in vivo mouse intranasal (IN) exposure models to identify the inflammatory potential of WTCPM with specific emphasis on respiratory and endothelial tissue responses. The in vitro exposure studies found WTCPM exposure to be positively correlated with cytotoxicity and increased NO2- production in both BEAS-2B pulmonary epithelial cells and THP-1 macrophage cells. The in vivo C57BL/6 mouse studies found significant increases in inflammatory markers including increases in polymorphonuclear neutrophil (PMN) influx into nasal and bronchoalveolar lavage fluids (NLF and BALF), as well as increased levels of total protein and cytokine/chemokines levels. Concurrently, NLF, BALF, and serum NO2- levels exhibited significant homeostatic temporal deviations as well as temporal myograohic aortic dysfunction in myography studies. Respiratory exposure to- and evidence -based retention of- WTCPM may have contributed to chronic systemic effects in exposed mice that r resembled to observed effects in WTCPM-exposed human populations. Collectively, these findings are reflective of WTCPM exposure and its effect(s) on respiratory and aortic tissues, highlighting potential dysfunctional pathways that may precipitate inflammatory events, while simultaneously altering homeostatic balances. The tight interplay between these balances, when chronically altered, may contribute to- or result in- chronically diseased pathological states.

Combined study of source, environmental monitoring and fate of branched alkylphenols: The chain length matters.

Alkylphenols (APs) are chemicals of largely anthropogenic origin. Longer chain derivatives like 4-nonylphenol (4NP) or 4-tert.-octylphenol (4tOP) are mainly used for the production of alkylphenol ethoxylates, while short chain alkylphenols (SCAPs) can be applied during the production of phenolic or epoxide resins that are used in paint, glue or adhesive formulations. The source, environmental distribution and fate of 4NP and 4tOP were thoroughly demonstrated leading to growing concerns regarding their endocrine properties. Although, SCAPs are also expected to entail risks to the aquatic environment, only few studies dealt with the identification of possible sources or environmental concentrations thereof. In order to evaluate the role of resin-based building materials as a possible source of 4-tert.-butylphenol (4tBP), 4-tert.-pentylphenol (4tPP), 4tOP and 4NP, 18 formulations were tested. Furthermore, AP concentrations of four wastewater treatment plants (WWTPs) and 50 surface waters were analyzed to assess and compare environmental concentrations and the discharge of APs depending on their chain length. 4tBP was the dominant AP in analyzed building materials with concentrations up to 320 g kg-1. Furthermore, APs were detected in all WWTPs and waterbodies. 4NP was the dominant AP in most surface water and WWTP samples ranging from

Artificial turf infill associated with systematic toxicity in an amniote vertebrate.

Artificial athletic turf containing crumb rubber (CR) from shredded tires is a growing environmental and public health concern. However, the associated health risk is unknown due to the lack of toxicity data for higher vertebrates. We evaluated the toxic effects of CR in a developing amniote vertebrate embryo. CR water leachate was administered to fertilized chicken eggs via different exposure routes, i.e., coating by dropping CR leachate on the eggshell; dipping the eggs into CR leachate; microinjecting CR leachate into the air cell or yolk. After 3 or 7 d of incubation, embryonic morphology, organ development, physiology, and molecular pathways were measured. The results showed that CR leachate injected into the yolk caused mild to severe developmental malformations, reduced growth, and specifically impaired the development of the brain and cardiovascular system, which were associated with gene dysregulation in aryl hydrocarbon receptor, stress-response, and thyroid hormone pathways. The observed systematic effects were probably due to a complex mixture of toxic chemicals leaching from CR, such as metals (e.g., Zn, Cr, Pb) and amines (e.g., benzothiazole). This study points to a need to closely examine the potential regulation of the use of CR on playgrounds and artificial fields.

Does exposure to bentonite dust during tunnel hyperbaric interventions increase health risks for compressed air workers? A prospective qualitative and quantitative safety assessment.

INTRODUCTION: The mining and tunneling industries are historically associated with hazardous exposures that result in significant occupational health concerns. Occupational respiratory exposures causing pneumoconiosis and silicosis are of great concern, silicosis being non-curable. This work demonstrates that compressed-air workers (CAWs) performing tunnel hyperbaric interventions (HIs) may be at risk for hazards related to bentonite exposure, increasing the likelihood of developing harmful illnesses including cancer. Bentonite dust inhalation may result in respiratory levels of silica exceeding acceptable industrial hygiene standards. METHODS: A qualitative observational exposure assessment was conducted on CAWs while they were performing their HI duties. This was followed by quantitative data collection using personal and area air sample techniques. The results were analyzed and interpreted using standard industrial hygiene principles and guidelines from NIOSH and OSHA. RESULTS: Our work suggests bentonite dust exposure may be an emerging particulate matter concern among CAWs in the tunneling industry. Aerosolized bentonite particles may have potential deleterious effects that include pneumoconiosis and silicosis. Silicosis can result in the development of pulmonary carcinoma. CONCLUSIONS: The modern tunneling industry and required hyperbaric interventional tasks represent a potential public health and occupational concern for CAWs. This paper introduces the modern tunneling industry and the duties of CAWs, the hazardous environment in which they perform their duties, and describes the risks and potential harmful health effects associated with these hazardous exposures.

Environmental Health Education for Asbestos-Contaminated Communities in Italy: The Casale Monferrato Case Study.

BACKGROUND: Environmental health education contributes towards increasing awareness of communities to prevent exposure to hazardous substances. Casale Monferrato, the operating site for the Eternit asbestos-cement factory from 1907 to 1986, is a prioritized asbestos-contaminated site for remediation in Italy. The area is prone to severe asbestos-related diseases. About 50 cases of mesothelioma are diagnosed in Casale Monferrato annually; mesothelioma has been shown to be caused by occupational, environmental and domestic asbestos exposure. OBJECTIVES: The goal of this paper is to analyze the Casale Monferrato case study in terms of youth engagement in environmental health education initiatives on asbestos risk and health impact. The paper aims at underlining the lessons learned in order to share the success of this initiative with other communities living in asbestos-contaminated sites in different countries. METHODS: Peer education methodology has been used through the Asbestos Classroom to involve teachers, students and other local stakeholders in training activities, in selection of the contents for educational materials and interactive tools, as well as in choosing the presentation process for the aforementioned knowledge sharing instruments. FINDINGS: From November 2014 to June 2018, 185 high school students and teachers were trained through the Asbestos Classroom. Through December 2018, they trained 3,241 classroom visitors. The Classroom relies on an inclusive participative process in which young people play a key role in the network of relationships within their community. CONCLUSIONS: The paper corroborates the importance of engaging the educational system in communication efforts aimed at fostering collective awareness on environmental risk and health-related impacts for communities living in industrially contaminated sites. Considering the global dimension of the asbestos contamination and disease burden, this experience might be of relevance both in countries that banned asbestos and in those where asbestos is not yet prohibited.

Cement dust induce stress and attenuates photosynthesis in Arachis hypogaea.

This study was conducted to investigate the changes in leaf physiological parameters to abiotic stress induced by different levels of cement dust. On day 15, Arachis hypogaea L. plants (sowing day was considered as day 0) were divided into six groups, and cement was sprinkled over plants with the help of hand pump, twice a week at T1 (5 g pot-1), T2 (8 g pot-1), T3 (10 g pot-1), T4 (15 g pot-1), T5 (20 g pot-1), and T0/control (0 g pot-1), until fruit maturity. Morphometric parameters such as root and shoot length, leaf area, and seed weight were significantly higher in T0, while the minimum was recorded in T5. Physiological analyses of leaves and roots revealed a remarkable reduction (p < 0.05) in sugar, amino acid, and protein contents, while the concentration of enzymatic antioxidants was increased in cement-treated plants. The concentration of abscisic acid in leaves was significantly higher in treatment groups as compared with control, while gibberellic acid concentration was low. Strikingly, cement dust decreases the level of leaf photosynthetic pigments, reduces stomatal conductance, and adversely affects photosynthesis. Leaf histological analysis revealed confirmatory evidence of stomatal closure, cell damage, reduced cell area, and abridged leaf thickness. Salient features of the present study provide useful evidence to estimate cement dust as a critical abiotic stress factor, which has adverse effects on photosynthesis, leaf anatomical features, stomatal functioning, and productivity. Our work opens new avenues for a deep portfolio of cement-based stress mediating pathophysiology in Arachis hypogaea.

Progressive plasterer's pneumoconiosis complicated by fibrotic interstitial pneumonia: a case report.

BACKGROUND: Although the prevalence of pneumoconiosis has been decreasing due to improvements in working conditions and regular health examinations, occupational hygiene measures are still being established. Plasterers encounter a number of hazardous materials that may be inhaled in the absence of sufficient protection. CASE PRESENTATION: A 64-year-old man who plastered without any dust protection for more than 40 years was referred to our hospital with suspected interstitial pneumonia. Mixed dust pneumoconiosis and an unusual interstitial pneumonia (UIP) pattern with fibroblastic foci were diagnosed by video-assisted thoracoscopic surgery, and an elemental analysis detected elements included in plaster work materials. Despite the cessation of plaster work and administration of nintedanib, the patient developed advanced respiratory failure. CONCLUSION: Plasterers are at an increased risk of pneumoconiosis and may have a poor prognosis when complicated by the UIP pattern. Thorough dust protection and careful monitoring are needed.

Reuse of materials from a Sustainable Drainage System device: Health, Safety and Environment assessment for an end-of-life Pervious Pavement Structure.

Pervious pavement systems can have a life span of about 20years but, at end-of-life, it becomes necessary to evaluate the state of the infrastructure to determine whether they pose a health and safety risk to workers during dismantling, and also determine potential reuse of the waste material generated. In this paper, we report of an investigation conducted to evaluate whether Pervious pavement systems are hazardous to human health at end-of-life and also to assess the mobility of the stormwater pollutants trapped in the system as a measure of their potential release to receiving systems such as water-bodies and groundwater systems. After decommissioning, the pervious pavement structure was sampled for analysis including Gas Chromatography, inductively coupled plasma spectroscopy and, leachate analysis. Results show that carcinogenic risks were significantly below the regulatory limit of 1×10-6 while, the hazard quotients and cumulative hazard indices were also below regulatory value of 1, based on United States Environmental Protection Agency standards. Furthermore, mean concentrations of benzene, toluene, ethylbenzene and xylene were significantly less than the UK soil guideline values. The results of the leachate analysis show that the metals of concern, Pb, Zn, Cr, Ni, Cd and Cu were all below the threshold for reuse applications such as irrigation purposes as they were all below the regulatory limits such as Food and Agriculture Organization and, United States Environmental Protection Agency standards. Finally, the evaluation of potential reuse and recycling purposes indicate that wastes generated from the dismantling of the PPS are within limits for recycling as aggregates for other civil engineering projects as per European Union standards. This has potential to enhance UK's drive to achieve the target of 70% level of construction & demolition waste recovery for reuse and recycling by the year 2020 as per European Union Water Framework Directive.

Analysis and identification of elongated mineral particles in road coated aggregates.

The issue of Elongated Mineral Particles (EMP) in building materials has been revealed during roadworks in 2013 in France. In fact, road coating aggregates are made of specific rock gravels that can contain Naturally Occurring Asbestos (NOA), which is mainly actinolite. The legislation refers to six regulatory asbestos, that consist in asbestiform habitus of the six minerals. The current technical standard is not adapted for analyzing natural material, as it cannot distinguish the asbestiform fibers and the cleavage fragments fibers. Therefore, the Eichrom Laboratories developed an internal method for analyzing rock gravel and identifying the different kind of EMP. This analytical method is based on an accurate sample preparation and three techniques at different resolutions: a petrological analysis with a stereomicroscope, a mineralogical analysis with a Polarized Light Microscope (PLM) and structural and with a Transmission Electronic Microscope (TEM). This innovative procedure is reinforced by the expertise of geologists, which is not necessary for the manufactured products. Putting the process in a national standard is essential for result homogenization of the asbestos testing laboratories.